Rubber Fishing Rod and Kayak Paddle Mounts for Exposed Racks - Qty 2

Video Transcript for Review of Exposed Racks Roof Rack - Fishing Rod or Kayak Paddle Mounts - ER37VR

Jeff: Hello everybody. This is Jeff at etrailer.com. Today, we're going to take a look at the rubber fishing rod or kayak paddle mounts for the Exposed Racks quick-clip pins. It is for a quantity of two mounts. Now, these parts will let you create your own fishing rod or kayak paddle carriers by attaching these rubber mounts to your Exposed Racks quick-clip pins. Now, drilling is required to install these.It does include the two rubber mounts and the hardware, but basically you can see what you would have to do is drill a hole to allow you to put this bolt through the mount right there in the middle and push it all the way through, and then that'll go into the quick-clip pin, and then you put your nut on the other end to tighten it down.

And it'll give you the mount on one of the quick-clip pins, but basically then you could put your fishing rod in there, or your kayak paddle in there. And then once it's in there, you just pull the strap down and lock it into place and it'll hold it there. And then to remove it, just pull this open and then you can pull it right out.Now, these parts are made in the USA, but that should do it for the review on the rubber fishing rod or kayak paddle mounts for the Exposed Racks, quick-clip pins.